Parts of machines and mechanical appliances enumerated under 8479.89

Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator)

For cutting other gears

Tuners (very high frequency or ultra high frequency) and tuner control devices, for reception apparatus for television

Grinding, sanding or polishing machines

Other, surge protection suppression plugs and sockets for a voltage not exceeding 250 V

Staples in strips

Sawing or cutting off machines

Drilling or morticing machines

Bearing housings, incorporating ball or roller bearings, for machinery

Sewing machines (lock stitch only) of the household type, with heads weighing  16 kg without motor or  17 kg with motor, having a value (not incl. frames, tables or furniture) of EUR 65 heads for these machines, weighing  16 kg without motor or  17 kg with motor

Cut it up in hundreds.

EMEA 2004

Gear finishing machines

Other fork lift trucks of a mass exceeding 10000 kg

Bending or assembling machines

Having a cutting width not exceeding 460 mm

2 Dose reduction steps

17 Dose reduction steps

32 Dose reduction steps

47 Dose reduction steps

You were great! THE WORLD IS YOURS

Give us a roll on the drums and...

Working capital

TREAD GROOVES

tread profile

A transmission with several bearings is to be operated in zone 1.

Andrew needs to run this bearing housing again

Operated by ultrasonic processes

Drawbenches for wire

For machines of subheading 84569020

Sewing machines and heads, of the household type (excl. lock stitch sewing machines with heads weighing  16 kg without motor or  17 kg with motor and heads weighing  16 kg without motor or  17 kg with motor)

(tyre rolling sound emissions, adhesion on wet surface and rolling resistance)

(temporary use spare unit, run flat tyres, tyre rolling sound emissions, adhesion on wet surface and rolling resistance)

Sewing machines (lock stitch only) of the household type, with heads weighing  16 kg without motor or  17 kg with motor, having a value (not incl. frames, tables or furniture) of EUR 65 each

(ii) Working capital funds

1.55 Working Capital

(o) Working Capital Fund

Bicycles without ball bearings

Others

Calendars of the perpetual type or with replaceable blocks mounted on bases other than paper or paperboard

Manufacture from chemical materials or textile pulp

Parts of converters, ladles, ingot moulds and casting machines of a kind used in metallurgy or in metal foundries, n.e.s.

Tread separation means the pulling away of the tread from the carcass.

NovoLet delivers 2 78 units in increments of 2 units.